SoundSlides

 

HomeSoundslides manualEditing a slide showChanging individual transitions

5.5. Changing individual transitions


Individual transitions can be set either through the timeline or through the "SLIDE INFO" tab. This feature is only available for audio slide shows.

For more information on setting a default transition for you template, click here.

From the timeline

To change the transition of an individual image, click on the transition connector. The transition connector is below the timing mark for a particular transition.

 

After clicking on the connector, a small "Transition" window with a drop-down menu will appear.

 

To change an individual transition, click on the drop-down menu and select a new transition type and transition time. There are three transition types:

If you set the pull-down menu to something other than "Use template default," you will also be able to enter a length of time for the transition.

 

You can set the length for the transition anywhere between 0.1 and 9.9 seconds. The default is 1 second.

Click the "Apply" button to finish changing the transition.

From the 'SLIDE INFO' tab

You can also change the type of transition for a single slide from the "DETAILS" tab under the "SLIDE INFO" tab. Changing the transition here will effect the transition immediately before the selected slide.

There are three transition types:

If you set the "Transition type" pull-down menu to something other than "Use template default," you will also be able to enter a length of time for the transition.

 

You can set the transition duration anywhere between 0.1 and 9.9 seconds. The default is 1 second.




This page was: Helpful | Not Helpful